Minneapolis · MSP air cargo, the Twin Cities device cluster and the river terminals

Inventory tracking in Minneapolis, from the air-freight shed to the device stockroom

Spatial Map is browser-based indoor mapping and 3D digital twin software that shows where stock is inside a building, using the rows your WMS, ERP, RFID readers and sensors already produce. Inventory tracking in Minneapolis covers two different kinds of building: distribution centers and air-freight sheds that move boxes fast, and the stockrooms and lab stores of the Twin Cities’ medical-device industry, where small, valuable items must be found by lot. Each building gets its own map, and the map opens in a browser.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Polar Pharma — Cold Storage & QC Facility, a pharmaceutical cold store & qc lab demo, in the Spatial Map 3D viewer with live device markers
Polar Pharma — Cold Storage & QC Facility
Polar Pharma, a demo cold store and QC facility: 1,140 rack locations, quarantine and returns areas, and stock on hold on the same map as the temperature zones.
Rack locations in the Polar Pharma demo
1,140
Rack locations in the Crestline demo fulfillment center
2,204
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

MSP: time-sensitive freight and the sheds around it

The Metropolitan Airports Commission operates Minneapolis–Saint Paul International Airport, which has two terminals with 131 gates, is served by the Blue Line light rail, and sits in the Fort Snelling Unorganized Territory rather than in any city. MnDOT lists five Minnesota airports with significant air cargo activity, MSP among them, and says air cargo is primarily high-value, time-sensitive goods, medical supplies among them.

Time-sensitive freight changes how a building is managed. A shipment is not a pallet in a rack, it is a cut-off. In a handler’s shed or a distribution center near the airport, the map that matters shows staging lanes and dock doors by status: staged, loaded, short or held. An alert rule set to “matches for N minutes” raises an in-app alert when an item has sat in an outbound lane too long. The Crestline demo shows 2,204 rack locations with staging lanes in front of the docks. Spatial Map does not connect to the airport or to any airline or handler’s systems.

The device cluster: lots, kits and a stockroom that must be searchable

University of Minnesota transportation researchers have described MSP as central to the medical-device supply chain and found that most device companies are in the seven-county Twin Cities region. This page treats that as context only. Spatial Map is not a medical product, makes no regulatory claim and does not replace a quality system: a device maker’s inventory record belongs in its ERP or quality system.

What the map adds is where things physically are. A device stockroom holds many small, high-value items by lot: loaner kits, sample sets, consumables and sub-assemblies. Put each shelf, cabinet and cage on the plan, load lot and quantity from your ERP or a CSV, and a supervisor can search for a lot and see its shelf. Color racks by a status column such as hold, quarantine or expiring and the map shows held stock without a walk. The Polar Pharma demo shows quarantine and returns areas, 1,140 rack locations and stock on hold on one plan, and the stock-by-bin guide shows how a CSV drives the colors.

River terminals and the head of navigation

The Saint Paul Port Authority, which describes itself as “committed to the working river”, operates the Saint Paul River Terminals on the Mississippi. The Upper Saint Anthony Falls lock in Minneapolis was added in the 1960s and extended the river’s head of navigation to the dam at Coon Rapids, until the lock closed in 2015. A river terminal is a different kind of stock site from a shed: large lots, long dwell and seasonal peaks.

For a bulk terminal or yard, the useful map is an inventory of piles, bays and tanks by owner and grade, with a row history that shows how it changed over a season. Data links render rows as markers, value badges, colored areas and heatmaps, and the History player replays any row’s history. Spatial Map does not read barge, lock or terminal systems; the inputs are your own scale tickets, WMS or ERP rows.

Cold winters and warehouse temperatures

Minnesota winters are an operating condition for every dock door: when a door sits open, the dock cools, and stock that must stay above freezing is at risk. A temperature sensor on the plan colors each zone, and a door sensor colors the door itself; an alert rule can raise an in-app alert when a door has been open for N minutes or a zone drops below a limit you set. See warehouse temperature mapping and sensor alert rules for the pattern.

None of this is a validated monitoring system, and Spatial Map makes no compliance claim for cold chain. It shows what your sensors report, in place, and it notices when a sensor goes quiet.

Services for teams in Minneapolis

Minneapolis teams usually start with the building, then add devices:

  • Distribution centers and 3PLs begin with inventory tracking by rack location, then add RFID at the dock doors.
  • Device makers and lab stores begin with a searchable map of stockrooms and cages, and add asset tracking for loaner kits and instruments.
  • RTLS and UWB matters mainly for big, busy floors where equipment and people must be located continuously; most buildings will not need it first.
  • If you have no readers or tags yet, our team can source RFID, BLE and UWB devices on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • Our team builds ERP and WMS integrations, RFID handheld apps and an RFID inventory system as client projects. The product runs as cloud or on-premises.

Also served nearby

The same approach covers Saint Paul, Bloomington, Eagan, Plymouth, Maple Grove, Shakopee and Burnsville around the Twin Cities. Nothing needs to be installed on site: the map opens in a browser.

How Spatial Map does it

From a stock list to a live Minneapolis map

  1. 01

    Pick one stockroom or shed

    The building where finding an item by lot or by cut-off costs the most time.

  2. 02

    Map shelves, cages and docks

    Upload the plan, let AI Map draft the floor, then name shelves, cages and lanes the way your ERP or WMS does.

  3. 03

    Connect stock and lots

    A CSV of bin inventory first, then the table write API or a polled REST endpoint for ERP, WMS and RFID rows.

  4. 04

    Add hold and cut-off rules

    In-app alerts for items staged too long, doors open too long and readers or sensors that stopped reporting.

What Minneapolis teams track

Air-freight staging

Pallets by outbound lane before the cut-off, with the lanes colored by status.

Lot-level stockrooms

Shelves and cages colored by hold or quarantine, with a search by lot.

Loaner kits and instruments

Shared equipment with its last-seen area and a check-out log.

Cold docks and winter doors

Door and zone temperature in place, with in-app alerts for doors left open.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Inventory tracking in Minneapolis — questions we get

No. It has no link to airport, airline or handler systems. It shows what happens inside your own building, from your own WMS, RFID reads and sensors, so it complements those systems rather than replacing them.

No. Spatial Map makes no regulatory or compliance claim, and it is not a quality system or a record of lots for audit. Your ERP or quality system stays the record; the map shows where the stock physically is, and can color it by a hold or quarantine status you provide.

Yes, if your lot and location are in a table. The map lays each shelf or cage as an area, colors it from the table and lets a user open the row for that lot. Ask AI (beta) can answer plain-language questions about the open facility from its tables, read-only, with links to the map.

It shows readings from your door and temperature sensors in place and raises in-app alerts from rules you set, checked every 15 seconds. It does not control doors or heating and is not a validated monitoring system.

No. Spatial Map is sold online and our team works with customers in the United States remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger estates are quoted as custom services, and devices we source are quoted per project.

Map one Minneapolis stockroom before the next audit of the shelves.

Start the free trial and open the Polar Pharma demo, or send us the plan of a stockroom or distribution center and a sample of your inventory export through the contact form.