Columbus · Rickenbacker cargo airport, rail terminal and Foreign-Trade Zone 138

Warehouse tracking in Columbus, around the Rickenbacker inland port

Spatial Map is browser-based indoor mapping and 3D digital twin software that shows where pallets, trailers and equipment are inside a building, using the rows your WMS, RFID readers and sensors already produce. Warehouse tracking in Columbus has an unusual center of gravity: a cargo-focused airport, a railroad intermodal terminal and a foreign-trade zone sit on the same former airfield south of the city, and the distribution buildings around them handle boxes that arrive by air, by rail and by truck. Each building gets its own map, and the map opens in a browser.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo fulfillment center: 20 racks with 2,204 rack locations, pick-to-light, packing, staging lanes, forklifts and the trailer yard.
Rack locations in the Crestline demo fulfillment center
2,204
Dock doors in the Eastport cross-dock demo
50
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

A cargo-focused airport and a rail terminal on one former airfield

The Columbus Regional Airport Authority runs three airports and a foreign-trade zone, and describes Rickenbacker International as cargo-focused, with John Glenn Columbus International handling most passengers. The federal highway administration’s project profile calls the railroad’s intermodal terminal there a “new state-of-the-art mega-intermodal facility at the former Rickenbacker Airport” and dates its opening to March 2008. A 2016 trade-press report counted five air cargo terminals at the airport with more than 600,000 square feet between them.

For a warehouse in that neighborhood the interesting thing is how many ways a pallet can arrive. A building may take a container from the rail terminal in the morning, an air-freight unit load at noon and a trailer at night, and each has its own paperwork and its own cut-off. A map of dock doors, lanes and yard slots, colored by what your WMS says is staged, shows which mode is waiting on which door. The Eastport demo shows 50 dock doors, 44 yard slots and 1,180 RFID pallets on one map. Spatial Map does not connect to the airport, the railroad or terminal systems; it starts at the gate of your own building.

The Heartland Corridor: why boxes arrive double-stacked

The same federal profile describes the Heartland Corridor project: increased clearances in 28 tunnels and 24 other overhead obstructions across Virginia, West Virginia and Kentucky so that double-stack container trains can run between Roanoke and Columbus, a more direct route to Chicago than through Harrisburg or Knoxville. It became operational in September 2010. A double-stack train delivers a lot of boxes at once, and the building that receives them has to turn those boxes into pallets, cartons or loads fast.

That is a transload problem, and the failure mode is familiar: a container is opened, its contents are put away, and an hour later nobody can say which lane or rack holds the third pallet of order 4471. Tag cartons or pallets at the container door with UHF RFID, read them at the rack-aisle entrance, and the map shows where every one of them landed. The post on RFID warehouse rollout covers the order to build it in, and RFID gates explain how to place readers at a door. Test the tags on your own cartons first; the post on RFID tags for metal, liquids and apparel lists what to check.

Foreign-Trade Zone 138: stock with a status

Foreign-Trade Zone 138 covers a 25-county service area in central Ohio, and the authority describes it as a place where goods can be brought in without formal customs entry. A building that holds zone stock next to domestic stock, or several clients’ stock, has to keep the difference visible on the floor, because the wrong pallet on the wrong truck is a costly mistake that no report catches in time.

Spatial Map can color racks, lanes and areas by a status column you provide, such as zone, owner or hold, and a read-only share link lets a client open only the layers and floors you choose, with an expiry date and a view cap. It does not create customs entries or zone records and makes no compliance claim; those stay in your zone and customs systems, and the map only shows where the stock physically sits. The Crestline demo shows the quality-hold area beside staging lanes and the trailer yard.

Half the country in a day’s drive: the building as a hand-off point

The 2016 trade-press report quotes Rickenbacker’s pitch as roughly half the US population being within a day’s drive. Whatever the exact figure today, the buildings around Columbus are chosen for exactly that reason: they are hand-off points, where inbound freight is broken down in the morning and outbound loads must leave by an evening cut-off. In that kind of building the useful number is not stock on hand but how long a pallet has been staged.

An alert rule set to “matches for N minutes” on the staged-pallets table raises an in-app alert when a pallet has sat in an outbound lane longer than it should, and another set to “not updated for N minutes” notices a dock-door reader that has stopped reporting. Alerts appear in the app, with severity and acknowledge and resolve, and are checked every 15 seconds; they are not sent by email, SMS or push. For the pattern, see dock doors and trailer visibility.

Getting a Columbus building onto the map

Large distribution buildings are mostly long, simple rectangles, which suits automation. Upload the floor plan as a PDF, DWG (AutoCAD R2004–R2018, placed as a picture) or image, align it at real scale, and let AI Map draft walls, doors, racks and areas for a person to review; AI Map is available on paid plans and during the trial, with a monthly limit. Then connect stock: a CSV export of bin inventory drives the rack colors at once (stock by bin on a rack grid), and later your WMS or RFID middleware posts rows through the table write API (HTTPS, bearer API key, bulk upsert, 60 requests per minute per key).

Services for teams in Columbus

Columbus teams usually start with the building, then add devices:

  • Distribution centers and 3PLs begin with inventory tracking by rack location, then add RFID at the dock doors.
  • Yards and cross-docks add asset tracking for trailers, yard tractors, forklifts and returnable pallets.
  • RTLS and UWB matters mainly for big, busy floors where forklifts and people must be located continuously; most buildings will not need it first.
  • If you have no readers or tags yet, our team can source RFID, BLE and UWB devices on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • Where your IT team has no time, we build RFID handheld apps, ERP and WMS integrations and an RFID inventory system as client projects. The product runs as cloud or on-premises.

Also served nearby

The same approach covers Groveport, Obetz, Canal Winchester and Lockbourne around the airport and the rail terminal, and the distribution buildings elsewhere in central Ohio. Nothing needs to be installed on site: the map opens in a browser.

How Spatial Map does it

From a dock door to a live Columbus map

  1. 01

    Pick one building

    The distribution center where a container, an air-freight unit load and a trailer can all arrive in the same shift.

  2. 02

    Map the floor and yard

    Upload the plan, let AI Map draft it, then name docks, lanes and yard slots the way your WMS does.

  3. 03

    Connect stock and reads

    A bin-inventory CSV first, then the table write API or a polled REST endpoint for WMS and RFID rows.

  4. 04

    Add staging rules

    In-app alerts for pallets staged too long, doors gone quiet and readers that stopped reporting.

What Columbus teams track

Container transload

Pallets and cartons read as a container is unpacked, with the lane or rack each one landed in.

Air-freight and trailer staging

Unit loads and pallets by outbound lane before the cut-off, with lanes colored by status.

Zone and client stock

Racks colored by owner, zone or hold, with read-only share links for each client.

Forklifts and returnable pallets

Equipment and pallets with their last-seen area and a History player.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Columbus — questions we get

No. It has no link to airport, railroad or zone systems. It shows what happens inside your own building from your own WMS, RFID reads and sensors, so it complements those systems rather than replacing them.

Yes, once the pallet or carton has an identifier your systems read. Tag at the container door, read at the aisle or rack entrance, and your RFID middleware or WMS posts the rows; the map draws each one in the lane or rack where it was last read. Spatial Map does not read the container or the rail car; it starts where the goods enter your building.

It can color racks and areas by a status column such as zone, owner or hold, and show it on a read-only share link. It does not create customs entries or zone records and makes no compliance claim; your zone and customs systems stay the record.

Yes. A read-only share link lets you choose the layers and floors a client sees, set an expiry and a view cap, and revoke it at any time. For ongoing access you can add people with the Viewer role or a custom role.

No. Spatial Map is sold online and our team works with customers in the United States remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger estates are quoted as custom services, and devices we source are quoted per project.

Map one Columbus dock before the next cut-off.

Start the free trial and open the Crestline demo, or send us the plan of a distribution center and a sample of your WMS export through the contact form.