Faisalabad · Mills, M-3 and Allama Iqbal Industrial City

Inventory tracking in Faisalabad, from cotton bale to finished carton

Spatial Map is a browser-based live map of a building that shows where stock sits, using the counts, scans and RFID reads your own systems produce. Inventory tracking in Faisalabad is textile inventory: bales, yarn lots, greige and finished fabric rolls, cut pieces and cartons, spread across spinning sheds, weaving halls, dyeing houses and warehouses. A mill’s stock is not a list of items but a position in a process, and the map shows both.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Summit Assembly Plant, a assembly plant demo, in the Spatial Map 3D viewer with live device markers
Summit Assembly Plant
Summit Assembly Plant, a demo plant: WIP carriers between workstations, 867 raw-material and finished-goods rack locations, and the receiving and shipping docks.
Rack locations in the Summit assembly-plant demo
867
Rack locations in the Crestline fulfilment demo
2,204
Write API requests per key, with bulk upsert
60/min
Free trial, up to 5 facilities, no card
7 days

Lyallpur’s legacy: a mill town built on a canal colony

Faisalabad began as Lyallpur, founded in 1895 in the Chenab Colony and named after Sir James Lyall, the Lieutenant Governor of Punjab. It was renamed Faisalabad in 1977. Its Clock Tower dates from 1903, with eight bazaars running out from it that still work as a trading zone, and industrialisation in the 1970s filled the city with textile mills and chemical plants. That is why Faisalabad is called the “Manchester of Pakistan”.

For inventory, that history means older mills: sheds extended over decades, drawings that are missing or no longer match the floor, and stock that moves by hand and ledger. The place to start is the building as it is today — a scan, a photographed plan or a hand sketch of the sheds, aligned at real scale — not the building the drawings describe.

M-3 and Allama Iqbal industrial cities

The Faisalabad Industrial Estate Development and Management Company (FIEDMC) runs two large zones on the M-4 motorway at the Sahianwala interchange. M-3 Industrial City covers about 4,300 acres in 472 plots and links north through the M-2 towards Islamabad and Peshawar and south to Multan, the port of Karachi and Gwadar. Opposite it, joined by a flyover, Allama Iqbal Industrial City covers about 2,800 acres in 284 plots as a prioritised special economic zone under CPEC, with textile engineering, electronics, chemicals, food processing and packaging among its sectors.

New plants arrive with fresh drawings, which is the easy case for mapping, and a long road leg to the port: goods leave by truck for Karachi, so the despatch dock matters. Tag cartons or pallets at packing, read them at the dock door, and the map shows which loads are staged, which are still in the warehouse and which have gone. The Crestline demo shows 2,204 rack locations coloured by stock status and the staging lanes before the docks, and RFID warehouse management covers dock doors in general.

Looms, small units and the weaving-city plan

In 2018 FIEDMC and the All Pakistan Cotton Power Looms Association signed an agreement for a 100-acre “weaving city” at M-3, meant to bring power-loom units together; in March 2025 loom owners were still urging the government to build it. Whether or not it is built, the pattern around Faisalabad is clear: many small weaving units and godowns, each with its own fabric rolls and its own list.

You do not need RFID to start. Upload a CSV or Excel list of rolls with a bin or rack code as a table, draw the godown’s racks as a grid, and each location is coloured by what it holds; the post on CSV bin inventory to a live rack map shows the steps. Later a handheld count or RFID reads update the same table. Your developers can post rows through the table write API, bulk upsert at 60 requests per minute per key.

Yarn, greige and finished fabric: model the process

A mill’s stock moves through stages: bales to the blow room, yarn on cones to the weaving hall, greige fabric to the dyeing house, finished rolls to cutting and stitching or to the warehouse. Give each lot or roll one row — lot, count or quality, quantity, stage, location — and draw the buffers between the stages as areas. A data link colours each area by its stage or its quantity, so a supervisor sees where work is piling up.

An alert rule set to “matches for N minutes” on the roll table raises an in-app alert for a lot that has waited too long at dyeing, and Show on map takes the supervisor to it. Barcode scans on rolls and RFID tags on cartons or hang-tags suit different stages; RFID vs barcode in the warehouse helps you choose. A buyer’s auditor can be given a read-only share link limited to the floors you choose, and reports export to PDF or Excel. The Summit demo shows WIP carriers between stations and raw-material and finished-goods racks together.

Services for teams in Faisalabad

Mills and exporters here tend to follow this order:

Also served nearby

The same page covers the towns around Faisalabad, such as Jaranwala, Chiniot, Jhang and Toba Tek Singh, and smaller units on the bypasses of the main roads into the city.

How Spatial Map does it

From a mill ledger to a live stock map

  1. 01

    Map the sheds as they are

    Upload a plan, scan or photographed sketch, align it at real size, and draw racks, godowns and WIP buffers as areas.

  2. 02

    Load lots and rolls as a table

    One row per lot or roll with quantity, stage and location, uploaded from CSV or Excel or posted from your ERP.

  3. 03

    Colour by stage and age

    A data link colours each area by stage, quantity or how long a lot has waited.

  4. 04

    Add scans or RFID where they pay back

    Handheld counts first, then RFID at the despatch dock; each new read updates the same table.

Where Faisalabad teams track stock

Yarn, greige and fabric WIP

Lots and rolls by stage, with buffers between spinning, weaving, dyeing and stitching coloured by waiting time.

Finished-goods godowns

Racks and bins coloured by stock status, built from a spreadsheet first.

Export cartons at the despatch dock

Cartons and pallets staged by container before the truck leaves for Karachi.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Inventory tracking in Faisalabad — questions we get

Often barcodes on rolls and RFID on cartons or hang-tags. Rolls move through wet and dusty processes where labels get damaged, so test whichever you choose in your own shed. Spatial Map shows either, as long as your system posts a lot or roll ID with a location.

Yes. Measure the outer walls and main columns, sketch the sheds and racks, photograph the sketch and upload it at real size. AI Map can draft from the picture, and you correct what it gets wrong. Our services team can also do the mapping remotely for a fixed price.

Yes, and it is the recommended way. A CSV or Excel list of lots with a rack or bin code becomes a table, and the racks on the map are coloured from it. You can add handheld counts and RFID later without redrawing anything.

Yes. A read-only share link can carry an expiry date and a view cap and can be limited to chosen floors and layers, and reports can be exported to PDF or Excel. Spatial Map makes no compliance or audit claim; your own records remain the record.

No. Spatial Map is sold online and our team works with customers in Pakistan remotely, by video call and through the contact form. The app has no Urdu interface; names and labels you write can be in Urdu.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. A mill with its godowns and dispatch dock fits in one Pro plan.

Put one godown on a live map this week.

Start the free trial, upload a list of lots with their bin codes, or send us a plan or sketch of a mill shed through the contact form.