Hardware · RFID

RFID hardware supplier: UHF readers, antennas, handhelds, printers and tags

Spatial Map shows RFID reads on a live 3D floor plan, and on request our team also sources the RFID hardware behind them. As an RFID hardware supplier for projects — not a shop — we help you choose UHF RFID readers, antennas, handhelds, printers, gates and tags for your read range and environment, quote them per project, and integrate them so the reads land on the map.

Spatial Map: no credit card for the trial, runs in the browser, Pro is $60/month for up to 4 facilities. Explore the live demo

Illustrations of device types — not vendor product photos.

How we work as an RFID hardware supplier

We do not run an online shop and we do not publish prices. A project starts with the question — what do you want to track, where, and what should happen when a tag is read — and the hardware follows from the answer. We recommend devices and tags, source them through normal commercial channels, and set up the connection to Spatial Map. Quotes are per project.

Choosing is the valuable part. The same warehouse can need a fixed reader at the dock, handhelds for cycle counts and a printer at receiving, and each has different trade-offs. Our job is to keep the list short and justified.

What to decide before buying: read range, environment, tag form factor

Three factors drive almost every choice, and they interact:

  • Read range — how far the tag must be read from. A handheld count at arm’s length, a dock door a few metres wide and an overhead zone are different problems. Read range depends on the reader, the antenna, the tag, the product and the room, so quoted ranges are a starting point, not a promise. See how far can RFID be read.
  • Environment — metal racks, liquids, dense stock, concrete, moving forklifts and neighbouring readers all change what is read. Cold stores and outdoor yards add temperature and weather. Regional radio rules also differ, so devices have to match the country they will run in.
  • Tag form factor — a paper label on a carton, a hang tag on apparel, a hard tag for a tool, an on-metal tag for a rack or a container. The tag is usually the biggest lever on read quality. See RFID tags for metal, liquids and apparel.
  • Frequency — UHF is the usual choice for stock and asset tracking at distance; HF and NFC suit short-range reads. See UHF vs HF vs NFC.

The hardware we can source

We already integrate devices from Zebra, Chainway, SATO and Sanray, so proposals often start there, but the brand and model depend on the project and on what is available in your country, and both are confirmed in the quote. The categories:

  • Fixed readers and antennas — for dock doors, aisles, shelves and exits; antennas are chosen and aimed for the zone they cover.
  • Android RFID handhelds and sleds — for counts, searches, audits and encoding; usually paired with a custom handheld app.
  • RFID printers and encoders — to print and encode labels from your item data at receiving or packing.
  • Gates and portals — pedestals at exits or dock doors for movement events.
  • Tags and labels — on-metal, liquid-tolerant, apparel hang tags, laundry tags, rugged asset tags and paper labels.

From the box to the map

Hardware without a connector is a pile of devices. After sourcing, we integrate: fixed readers send events to a small edge service that maps antennas to doors and zones and drops duplicate reads; handhelds run an app built on the vendor’s SDK; printers get a print-and-encode workflow. Everything posts rows to Spatial Map through the table write API, and a data link puts them on the 3D plan with reports and share links.

Be clear about the limit. Spatial Map does not configure readers or tune antennas — that stays with the vendor’s tools and our set-up work — and its alerts stay in the app. The integration side is described on RFID hardware integration, and a typical budget picture is in RFID system cost.

RFID device types we help you choose

Device types, not a parts list. Illustrations, not vendor product photos.

  • Fixed readers and antennas

    Choose by the zone to cover, the number of antenna ports and the mounting options; antennas shape the read zone.

  • Handheld RFID computers

    Choose by the workflow, the Android version your app needs and the read power for the items you count.

  • RFID printers and encoders

    Choose by label size, media and volume; the print-and-encode job is built from your item data.

  • Gates and portals

    Choose by the opening width, the direction logic you need and how the reads reach your middleware.

  • Tags and labels

    Choose by the material they sit on, the handling they survive and the read range you need.

How it connects

From requirement to live reads

  1. 01

    Requirement

    Items, locations, read points and what should happen on a read.

  2. 02

    Recommendation

    A short list of reader, antenna, handheld, printer and tag options with the trade-offs explained.

  3. 03

    Quote and sourcing

    Quoted per project; devices sourced through normal channels, warranty from the manufacturer.

  4. 04

    Integration

    Connector, antenna-to-zone mapping and tag-to-item join, posting to a Spatial Map table.

  5. 05

    Live map

    Reads on the 3D floor plan, in reports and in share links; the History player for movement.

What an RFID hardware project delivers

A reasoned device list

The readers, antennas, handhelds, printers and tags for your environment, with why each was chosen.

Sourcing

Devices supplied against a per-project quote; shipping and duties handled per quote.

The connector

Edge service, handheld app or print workflow that turns device output into table rows.

A live map and reports

The devices and tagged items on your floor plan, with reports and read-only share links.

RFID hardware — frequently asked questions

Yes, on request and for a project. We help you choose readers, antennas, handhelds, printers, gates and tags, source them, and integrate them with Spatial Map. It is quote-based: there is no online shop.

No. There is no online shop and no price list. Hardware is quoted per project, because the right quantities, antennas, tag types, cabling and shipping depend on your building and your use case. Send us a floor plan and a short description and we reply with a quote.

No. Spatial Map is not an authorised partner, distributor or certified integrator of Zebra, Chainway, SATO, Sanray or any other vendor, and it is not affiliated with or endorsed by them. Zebra, Chainway, SATO and Sanray are trademarks of their respective owners. We source devices through normal commercial channels for your project; warranty and device support come from the manufacturer.

Start from the item and the surface: paper cartons, apparel, metal tools or liquid containers each want a different tag. We recommend a short list and, where it matters, suggest testing a few tag types on your real items in a pilot before ordering volume.

It depends on the reader, antenna, tag, the product it is attached to and the room, so a quoted maximum range is only a starting point. We design around the read zone you need and test it. See how far can RFID be read.

Yes. Spatial Map is hardware-agnostic: buy from your usual supplier and we integrate what you own. See RFID hardware integration.

The manufacturer, under its own warranty. We support the Spatial Map side and the connection or software we built for you.

Tell us what you want to tag — we’ll shortlist the hardware.

Send a floor plan, the items to track and the read points. We will reply with a recommendation, a quote and a map of your own building.