Izmir · Aegean Free Zone, Alsancak port and the organised zones

RFID tracking in Izmir, from the Aegean Free Zone to the despatch door

Spatial Map puts RFID reads on a live 3D map of the building where they happen, so a tag at a dock door becomes a pallet in a lane, a carton in a container or a roll at a despatch bay. RFID tracking in Izmir starts with an Aegean port city whose cargo moves between a free zone at Gaziemir, a state-run port at Alsancak, an airport cargo shed and two large organised industrial zones, and every one of those buildings can carry its own map. Your readers and middleware do the reading; Spatial Map shows each read in place.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Eastport Cross-Dock Freight Hub, a cross-dock & trailer yard demo, in the Spatial Map 3D viewer with live device markers
Eastport Cross-Dock Freight Hub
Eastport Cross-Dock, a demo freight hub: 50 dock doors, 44 yard slots and 1,180 RFID pallets, with the gate and weighbridge.
Dock doors in the Eastport cross-dock demo
50
RFID pallets moving through Eastport
1,180
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

The Aegean Free Zone: goods that wait in a particular building

The Aegean Free Zone sits in Gaziemir and is run by its operator, ESBAŞ, whose own milestones page dates the company to August 1990. The operator describes the airport as 4 km from the zone and the port and the city centre as 12 km away. Other published sources give different figures for its area, so none is quoted here. What matters inside a free zone is not the acreage but the status of each lot: goods that are inside, goods being processed and goods about to leave.

Spatial Map does not hold customs records and does not connect to customs systems. It can show where physical goods are. Draw the zone’s warehouses as facilities, draw a held area as a coloured zone, read RFID tags on pallets or cartons at the door, and the map shows which lots are staged, which are inside and which have left. Every movement stays in row history, and the History player replays a shift. The Eastport demo shows the pattern with 50 dock doors and 1,180 RFID pallets.

Alsancak port, a state-run gateway on Izmir Bay

The Port of Izmir at Alsancak, on Izmir Bay, is operated by TCDD, the state railway authority. Figures for its volume and capacity vary between reports, which is why none appears here. A second project is planned further north: the Çandarlı port, whose groundbreaking was in May 2011, with a breakwater as its first phase, a build-operate-transfer model and a connection to the Menemen-Aliağa-Çandarlı motorway. Whatever the schedule of that project, the cargo sheds around Izmir Bay are where the day-to-day work is done.

In those sheds the problem is usually the same: a trailer arrives, a lot is checked in, and half an hour later nobody knows which door it went to. RFID portals at the dock doors and tags on pallets fix the first part, and the map fixes the second. A row of readers at a door is a gate, and the RFID gates page explains how to place them. RFID warehouse management covers staging lanes. Spatial Map does not connect to port community or terminal systems; it shows what your own reads say.

Atatürk and Kemalpaşa: two organised zones, textile and food

The Izmir Atatürk Organised Industrial Zone says it was established in 1990 on 6,240,000 square metres, with about 600 active companies and about 50,000 employees. Its companies are mainly in textiles, ready-to-wear, machinery, the automotive sub-industry, metal, plastics, chemicals, food, and electrical and electronics. By its own figures it lies 20 km from Izmir port, 45 km from the airport and 8 km from the TIR customs. Kemalpaşa Organised Industrial Zone, on the Izmir–Ankara highway, is described in the press as Izmir’s largest; its area is quoted differently in different places, so only the description is used.

For a garment plant, an export order splits into cartons by size, colour and destination, and a short carton is usually found at the loading dock, not at the packing table. Label each carton with a UHF RFID tag at packing, read it at the despatch door, and the map shows which cartons of an order are staged and which are still on the floor. For a food plant the same reads sit beside a cold room’s temperature: see temperature monitoring. Tags on apparel and metal fittings behave differently, so test them in your own packing area first; the post on RFID tags for metal, liquids and apparel lists what to check. The Crestline demo shows 2,204 rack locations coloured by stock status.

The airport cargo shed

Adnan Menderes Airport lists a cargo terminal with a warehouse of 1,200 square metres indoors and 600 square metres outdoors, and describes scheduled bonded cargo services. A shed that size has few doors and many consignments, so the question is which cage or pallet is where. A map of a shed with cage positions coloured by status, RFID reads at the door and an in-app alert when a consignment has sat longer than its slot is a small, quick project, and it can be built in a day from a drawing or a photograph.

Spatial Map is independent of the airport and its handlers and reads only the data your team sends. It shows where goods physically are, not air waybills or customs entries.

Services for teams in Izmir

Where Izmir teams start depends on the building:

  • Forwarders, free-zone and port-side warehouses usually begin with inventory tracking at dock doors, because a lost pallet there costs a vessel cut-off.
  • Plants in the organised zones tend to begin with asset tracking for returnable crates, moulds and forklifts, then add RFID for stock.
  • RTLS and UWB matters mainly for big, busy yards and plants where vehicles and people must be located continuously; most buildings will not need it first.
  • If you have no readers or tags yet, our team can source RFID readers, antennas and tags on request, quoted per project, with manufacturer warranty: see hardware and demo kits on request.
  • Where there is no in-house developer, our team builds Android RFID handheld apps, ERP and WMS integrations as client projects, and the product runs as cloud or on-premises.

Also served nearby

The same approach covers Torbalı, Menemen, Aliağa and Bornova, and the towns along the Izmir–Ankara highway. Nothing needs to be installed at any of them: the map opens in a browser.

How Spatial Map does it

From the free-zone gate to the despatch door

  1. 01

    Pick one building

    A free-zone warehouse, a port-side shed or a plant’s despatch dock — wherever a missing carton costs most.

  2. 02

    Map doors, lanes and racks

    Upload the plan, photo or sketch, let AI Map draft the floor, and name read points the way your middleware names them.

  3. 03

    Connect reads and stock

    RFID middleware and your ERP post rows through the table write API, a polled REST endpoint or CSV and Excel uploads.

  4. 04

    Add door and silence rules

    In-app alerts for cartons staged too long, short loads before cut-off and readers that stopped reporting.

What Izmir teams track

Free-zone and port-side warehouses

Dock doors, yard slots, held areas and pallets staged for the right trailer.

Export cartons from textile plants

Cartons read at packing and the despatch door, with each order’s status by lane.

Food exporters with cold rooms

Cold-room readings and held pallets in one place.

Returnable crates and tooling

Check-out and last-seen area for the containers that go back and forth to customers.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

RFID tracking in Izmir — questions we get

No. It has no link to customs, free-zone or port community systems. It shows what happens inside your own building, from your own RFID reads, ERP or WMS and sensors, so it complements those systems rather than replacing them.

It shows whatever your table says, in place. Tag pallets or cartons, read them at the door, and have your system write the status (inside, in process, left) to a table; the map colours each lot or area by that status and keeps the history of every change. Your customs records stay the legal record.

That depends on the tag, the item and how you read it, so test in your own packing area first. Spatial Map does not make tags; it shows what your readers report. The post on RFID read rate and missed tags explains what to check.

Yes. Your developers can push rows to a table through the write API (HTTPS, bearer API key, bulk upsert, 60 requests per minute per key), or expose a REST endpoint that Spatial Map polls. If you would rather not build it, our team does integrations as client projects.

Not yet. The app is available in English, Arabic, Chinese, French, German and Spanish. Your own names, rack codes and report titles can be written in Turkish.

No. Spatial Map is sold online and our team works with customers in Türkiye remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. RFID hardware, if you ask us to source it, is quoted per project and is not part of the subscription.

Map one Izmir dock before the next shipment.

Start the free trial and open the Eastport demo, or send us the plan of a free-zone warehouse, plant dock or cargo shed and a sample of your reads through the contact form.