Mersin · The port, the free zone and the citrus belt

Cold chain monitoring in Mersin: citrus, fresh produce and reefers

Spatial Map shows the temperature of every cold room, the state of every cold-room door and the position of stock on hold on a live 3D map of the building, from the sensors and systems you already run. Cold chain monitoring in Mersin begins with fruit: the province is Türkiye’s largest citrus exporter, and its cold stores, packing houses and reefer yards sit around a port and a free zone that were built for trade. The map is where a temperature excursion becomes a room, a door and a pallet.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Cold Chain film: “Keep every batch in band” beside the floors of Polar Pharma in 3D
The Cold Chain film: Polar Pharma, a demo cold store with 8 temperature zones, probes and door sensors, a cold room leaving its band and 647 RFID pallets read at every door.
Rack locations in the Polar Pharma cold-store demo
1,140
How often alert rules are checked, with alerts shown in the app
15 s
Recent changes kept in each table’s row history
500
Free trial, up to 5 facilities, no card
7 days

The citrus belt: a season that fills the cold rooms at once

Trade press citing the Mediterranean Exporters’ Association reported that Mersin was the largest exporting province for citrus in 2025, with exports worth US$696.2 million, in a national total of US$1.47 billion, a rise of 41 per cent on the year before. Lemons, mandarins and oranges ripen on a calendar, and the packing houses and cold stores fill together; in a few weeks a room goes from half-empty to full of pallets with different fruit, different destinations and different departure days.

In Spatial Map each cold room, packing hall and holding area is an area drawn on the plan. Temperature probes post readings to a table and each room is tinted by its latest value; door sensors show which room is open and for how long. An alert rule such as “room above its limit for N minutes” raises an in-app alert, and Show on map takes the supervisor to the room. The post on cold storage temperature monitoring with a heatmap shows how readings are mapped, and temperature monitoring explains the sensor side.

The port: reefers, rail and a cold store on the quay

The Port of Mersin is owned by the state railways, and its operating right was transferred on 11 May 2007 for 36 years. Five of its berths have rail connections over the Adana–Mersin line, and open storage exceeds 3 square kilometres. The concession operator opened a cold store for reefer traffic at the end of 2021. The port is also described as a transit hub for Iraq, Iran and the CIS countries, which is why many reefers arriving here are on their way somewhere else.

Spatial Map does not connect to the port’s terminal systems, to reefer units or to customs systems; it shows your own building and your own yard. For a forwarder’s or exporter’s yard that means drawing the reefer slots, the pre-cooling room and the dock doors, and reading RFID tags on pallets or shipments in and out. The Polar Pharma demo shows temperature zones, cold-room doors and reefer docks on one map, and warehouse temperature mapping explains where probes should go. It is a pharmaceutical store, but a layout of rooms, doors and docks works the same way for fruit.

The free zone beside the harbour

The Mersin Free Zone opened on 3 January 1987 as the first free zone in Türkiye. It covers about 836 decares (0.836 square kilometres) in the harbour area, next to the port. A zone of that size has dense, shared buildings: warehouses, cold rooms and processing halls, often with several tenants under one roof.

Draw each tenant’s area on the same plan and give each a read-only share link that shows only the floors and layers you choose, with an expiry date and a view cap. They do not need an account. Spatial Map is not a customs system and makes no statement about free-zone rules; it shows where goods physically are, and the History player replays what happened to a room’s temperature or a pallet’s movements.

The summer afternoon and the quiet sensor

A cold chain fails in two ways: a room that drifts out of range, and a probe that stops reporting so nobody notices it. The second is the one an alert on silence catches: a rule on the sensor table raises an in-app alert when a probe has not updated for N minutes, so a flat line is not mistaken for a stable room.

Alerts are in-app only: a bell, a toast and the Alerts page, with severity, acknowledge and resolve. There is no email, SMS or push notification. Spatial Map makes no claim about food-safety or any other standard; your monitoring procedures stay the record, and the map shows what your sensors report and where the affected stock sits. See warehouse sensor alert rules for patterns.

Services for teams in Mersin

Mersin teams usually start small:

Also served nearby

The same approach covers Tarsus, Erdemli, Silifke and Anamur, and the packing houses and cold stores along the coast road. Nothing needs to be installed at any of them: the map opens in a browser.

How Spatial Map does it

From a cold room to a map of the season

  1. 01

    Pick one room

    The cold room that fills first in the season, drawn from a plan, a photograph or a sketch.

  2. 02

    Connect probes and doors

    Your sensor platform posts rows through the table write API, or Spatial Map polls its REST endpoint.

  3. 03

    Colour rooms and set rules

    Tint each room by its latest reading and add “above limit for N minutes” and “silent for N minutes” alert rules.

  4. 04

    Add pallets later

    RFID or barcode reads at the doors show which stock sits in which room.

What Mersin teams monitor

Citrus and produce cold rooms

Room temperatures, door states and pallets by room.

Reefer yards and dock doors

Reefer slots, dock doors and pallets staged for the right container.

Packing houses and chilled distribution

Rack-level stock by bin with a cold area and a staging lane.

Retail chilled counters

Fridge temperatures and shelf stock across the floors of a store.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Cold chain monitoring in Mersin — questions we get

No. Compliance comes from your procedures and your monitoring system of record. Spatial Map shows live temperatures, door states and held stock on the plan, keeps a history of every change and exports reports (PDF, Excel, CSV, JSON) your quality team can review.

The ones you already run. Spatial Map is hardware-agnostic: your sensor platform or logger software posts readings to a table through the write API, or exposes a REST endpoint that Spatial Map polls. Only BlueIOT RTLS servers have a built-in driver; everything else connects through the API.

Not yet. Alerts are in-app only: a bell, a toast and the Alerts page, with severity, acknowledge and resolve. If your sensor platform already sends SMS or email, keep using it and use Spatial Map to show where the affected stock is.

It shows what your own systems send. If your yard system or a telemetry platform posts reefer set-points and readings to a table, each slot is coloured by its value. Spatial Map does not connect to the port’s terminal systems or read reefer units itself.

Not yet. The app is available in English, Arabic, Chinese, French, German and Spanish, which helps for buyers in the Middle East. Room names and report titles you write can be in Turkish.

No. Spatial Map is sold online and our team works with customers in Türkiye remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Sensors, if you ask us to source them, are quoted per project and are not part of the subscription.

Put one cold room on a map before the season.

Start the free trial and open the Polar Pharma demo, or send us the plan of a cold store and a sample of your sensor readings through the contact form.