Malmö · The Øresund link, the port and southern Skåne

Warehouse tracking in Malmö, where the bridge sets the clock

Spatial Map shows the stock, pallets, dock doors and yards of a building on a live 3D map, fed by the RFID, barcode, BLE and WMS data you already produce. Warehouse tracking in Malmö is shaped by the city’s place on the map: the Swedish end of a fixed road and rail link to Denmark, a port that handles new cars, ro-ro and bulk, and a stretch of Skåne where goods for the Nordic markets are received, held and sent on within a day. Your systems report; Spatial Map shows each read in the building where it happened.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Eastport Cross-Dock Freight Hub, a cross-dock & trailer yard demo, in the Spatial Map 3D viewer with live device markers
Eastport Cross-Dock Freight Hub
Eastport Cross-Dock, a demo freight hub: 50 dock doors, 44 yard slots and 1,180 RFID pallets, with the gate and weighbridge.
Dock doors in the Eastport cross-dock demo
50
Yard slots in the same demo
44
RFID pallets moving through Eastport
1,180
Free trial, up to 5 facilities, no card
7 days

The link to Denmark: freight that arrives in waves

The Øresund link was dedicated and opened to traffic on 1 July 2000. Its bridge section is 7,845 metres long, and the crossing carries a four-lane road and a double-track railway, with freight trains using the rail line. The bridge operator’s traffic statistics list 706,411 vehicles in the category “trucks and vans from 6 metres” for 2025, which averages about 1,900 a day, and warn that vans of 6–9 metres have been in that category since 2019, so earlier years cannot be compared directly.

For a warehouse on either side, that is not a steady stream. Trucks arrive in waves that follow ferry timetables, shift ends and the other side’s cut-offs, and a pallet that misses its wave waits for the next one. Draw the dock doors, the staging lanes and the yard on the site plan, colour each lane by the departure it is built for, and let reads at the doors show which pallets are in the right lane. An alert rule “matches for N minutes” raises an in-app alert when a lane has sat full past its slot. The Eastport demo shows the pattern; the post on yard visibility for dock doors and trailers goes through it. Spatial Map has no link to the bridge operator, to border or customs systems or to carriers; it shows what your own reads and tables say.

Port-side: new cars, ro-ro and bulk in one harbour

Copenhagen Malmö Port says its Malmö terminals accommodate up to 40,000 cars from all over the world, and that in Malmö it operates Scandinavia’s largest terminal for new cars. Ro-ro ferries link the same flows with the continent via Travemünde, and the dry and liquid bulk terminals handle goods such as oil products, chemicals, cereals, scrap metal and wood pellets. The port also rents buildings and land next to its Malmö terminals. For Sweden’s other big port, on the west coast, see Gothenburg.

Each cargo needs a different map. A car terminal is a grid of lots and rows: draw each lot as an area, show vehicles as rows from your yard system or as tagged assets, and a style rule colours lots by status such as arrived, held or ready for transport. A bulk shed or tank farm is a set of areas coloured by the fill level your own system sends. A warehouse behind the quay is a rack map with dock doors. Positions come from your yard system, tags or posted rows; Spatial Map does not detect vehicles by itself, and it does not connect to the port’s or the terminals’ systems.

Industrial park and quayside land: new sheds, several users

Malmö Industrial Park describes itself as in the heart of the Øresund region, with quayside land and modern freight terminals, and it targets production, online retail, warehousing, goods processing and logistics. That mix — a manufacturer, a web shop and a forwarder in neighbouring sheds — means many drawings, many owners and handovers between them.

A shed that is new to you starts with a PDF from the architect or a DWG (AutoCAD R2004–R2018) from the landlord, which Spatial Map places as a picture. Align it to real scale and let AI Map draft walls, doors, racks and areas for a person to review; AI Map is available on paid plans and the trial, with a monthly limit. Give each user of a shared building its own table, and a read-only share link that is locked to one floor or a few layers, with an expiry date. The Crestline demo has 20 racks and 2,204 rack locations coloured by stock.

Skåne as a logistics node, and stock on both sides of the strait

The regional investment agency Invest in Skåne calls Malmö Sweden’s third-largest city and a node in the logistics triangle between Oslo, Stockholm and Copenhagen, places Copenhagen Airport 30 kilometres from central Malmö, and in a 2020 brochure describes Skåne as having two international airports and seven international harbours. Those are the agency’s own figures, not ours, and they date from before 2021.

The practical point for a Malmö operator is that the other half of the stock is often in Denmark. Each site is its own facility in one workspace, so a planner sees a Malmö shed and a Danish cross-dock side by side, with roles that decide who sees what and a table per site. Spatial Map is not a customs or VAT tool and does not move stock between sites; it shows what each site’s systems report. For the Danish side see Copenhagen and Denmark.

Services for teams in Malmö

Where Malmö teams usually start depends on the building:

  • Cross-docks and forwarders near the link start with inventory tracking at the dock doors and staging lanes, because a missed wave costs a departure.
  • Car terminals, yards and depots look at asset tracking for vehicles, trailers and returnable equipment, mapped by lot.
  • Multi-tenant warehouses begin with RFID warehouse tracking and one share link per customer.
  • RTLS and UWB matters for very large sheds where trucks and people must be located continuously; a BlueIOT server connects directly and other engines through the table write API.
  • If you have no readers, tags or gateways yet, our team can source devices on request, quoted per project, with warranty from the manufacturer: see hardware and demo kits on request.
  • Handheld apps, WMS integrations and other custom software are built as client projects, and the product runs as cloud or on-premises.

Also served nearby

The same page covers Lund and Landskrona, Svedala and Staffanstorp, Helsingborg and Trelleborg, and the industrial areas along the E6 and E20 around Malmö. Nothing needs installing at any of them: the map opens in a browser, and the interface is in English — names such as “Förråd”, “Lastbrygga” or “Södra hamnen” stay exactly as you type them. For the capital and the west coast see Stockholm and Gothenburg.

How Spatial Map does it

From a drawing to a live Malmö shed map

  1. 01

    Pick one building

    A cross-dock, a car lot, a shared shed or a port-side store — wherever a missed departure costs most.

  2. 02

    Import and align the plan

    Upload the PDF, DWG or image, place it at real scale, and let AI Map draft walls, doors, racks and lanes for review.

  3. 03

    Connect your reads and stock

    RFID middleware, a yard system and your WMS post rows through the table write API, a polled REST endpoint or CSV and Excel uploads.

  4. 04

    Share and alert

    Read-only links for customers and hauliers, and in-app alert rules for lanes held too long and readers that went quiet.

What Malmö teams track

Cross-dock lanes against departures

Pallets staged for the right truck, with short loads visible before cut-off.

Vehicle lots and yards

Lots as areas coloured by status, trailers and equipment as live markers from your yard system.

Multi-client fulfilment sheds

Rack-level stock by status, with a read-only view per customer.

Plant stores and line-side stock

Raw material, work in progress and finished goods by location.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Malmö — questions we get

No. It has no link to the bridge operator, to border or customs systems or to carriers. It shows what happens inside a building you operate, from your own RFID reads, WMS and yard data, so it sits beside those systems rather than replacing them.

It can show them, with limits. Draw each lot as an area and show vehicles as rows from your yard system or as tagged assets; a style rule colours lots by status. Spatial Map does not detect vehicles on its own, and it does not read the port’s or the terminal’s systems.

Yes. Each site is its own facility with its own floors, tables and rules, and roles and share links control who sees what. Spatial Map does not handle customs, VAT or transfers between sites.

No. The interface is available in English, German, French, Spanish, Arabic and Chinese, so Swedish teams use it in English. Dock names, rack codes and report titles are yours and can be in Swedish, å, ä and ö included.

No. Spatial Map is sold online and our team works with customers in Sweden remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger estates are quoted as custom services; hardware, if you ask us to source it, is quoted per project.

Map one Malmö dock before the next wave of trucks.

Start the free trial and open the Eastport demo, or send us the plan of a cross-dock, a car lot or a shared shed and a sample of your reads through the contact form.