Tilburg · The logistics hotspot, the Wilhelminakanaal and the Spoorzone

Inventory tracking in Tilburg, where one customer’s stock sits in many buildings

Spatial Map shows stock by location on a live 3D map of the building: racks coloured by what your WMS says, pallets and cartons placed by their last RFID or barcode read, dock doors and staging lanes in context. Inventory tracking in Tilburg is a multi-building job, because the Tilburg–Waalwijk region is full of distribution centres that hold the same customer’s goods in several sheds, for several customers at once. One workspace holds all of them, and a share link shows each customer only its own part.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo fulfilment centre: 20 racks with 2,204 rack locations, pick-to-light, packing, staging lanes, forklifts and the trailer yard.
Rack locations in the Crestline fulfilment demo
2,204
Racks in the same demo
20
Dock doors in the Eastport cross-dock demo
50
Free trial, up to 5 facilities, no card
7 days

The logistics hotspot of the year, for the seventh time in eight

In November 2026 the Tilburg–Waalwijk region was named the Netherlands’ best logistics hotspot for the seventh time in eight years, in an award decided by 39 independent experts who assessed 24 logistics hubs; West-Brabant came second and Noord-Limburg third. The jury pointed to accessibility by road, water and rail to the ports and the European hinterland, to innovation and cooperation, and to the fact that nearly two-thirds of the renewable energy generated on the region’s business parks comes from solar panels on logistics buildings. A five-year project, the Tilburg Initiative for Future Logistics, involves Tilburg University, a regional development body and eleven companies.

The Netherlands page names Tilburg among the Brabant and Limburg distribution regions; here the point is the stock. When a region holds so much, the hard question is rarely one rack. It is where the same article sits across three buildings, which of them can release it first, and whether the count in the WMS matches what is on the floor. Each building is its own facility in Spatial Map, in one workspace, with a table per customer and roles that decide who sees what. Spatial Map is not a WMS: it shows stock that your WMS or your scanners report.

The Wilhelminakanaal and the Piushaven: stock that arrives by barge

The Wilhelminakanaal is 68 kilometres long and was opened to shipping in full on 4 April 1923. It connects Tilburg to the Meuse system, with Lock II at the city’s western border. The Piushaven, dug in 1921 as a coal harbour for the steam engines of the textile industry, is now a museum harbour with hospitality around it. Ship size depends on the stretch: the part from Geertruidenberg to Lock I at Oosterhout takes CEMT Va vessels up to 135 by 11.5 metres, the part between Locks I and II takes CEMT IV vessels of 90 by 9.6 metres, and the stretch east of Tilburg takes CEMT II.

Water is slow and bulk. A barge arrives with many pallets at once, and the question is the gap between arrival and available stock. Draw the receiving dock and its inbound staging, post the expected lines from your ASN or booking table, and let reads at the door fill in what has been received. A lane for “received, not put away” turns the gap into an area that is red when it has held pallets for too long. Spatial Map does not track vessels; it shows what your reads and tables say. The post on loading bin stock from a CSV onto a live rack map covers the data side.

From wool mills to the Spoorzone: drawings of every era

Tilburg was the wool capital of the Netherlands, with 145 wool mills in 1881, until the industry collapsed in the 1960s. The 75-hectare Spoorzone around the station was once a railway maintenance yard and is being redeveloped, industrial estates on the city’s edge date from the 1960s onwards, and the region sits on the transport corridor between Antwerp and Rotterdam and the Ruhr. A team here can inherit a building designed for something else, extended three times, with a plan that exists only as a scan.

Spatial Map starts from what you have: a PDF, an image, or a DWG (AutoCAD R2004–R2018, placed as a picture). Align it to real scale, let AI Map draft walls, doors, racks and areas for a person to review, and fix what it missed. AI Map is available on paid plans and the trial, with a monthly limit and no accuracy figure. Mezzanines, stairs and lifts are drawn as part of the building, and a heatmap of where stock waits stops at walls and closed doors.

Counting without closing the building

Many Tilburg sheds work for several customers, and a count that closes a bay closes a customer’s orders. The way out is to count in slices: scan or read one aisle, compare it with the table, and mark the slice on the map. An RFID handheld or a fixed reader at a lane reads what is there, the map colours each location as matched, missing or unknown, and the difference list goes back to the WMS through your own integration. RFID stock counting and the post on how RFID stock counting works explain the method.

The workforce in a hub like this changes often, and many people work in more than one language. The interface is available in English, German, French, Spanish, Arabic and Chinese, each user picks their own language, and location names, bin codes and report titles stay as you type them — Dutch included. A map that shows where to go replaces a lot of explaining.

Services for teams in Tilburg

Where Tilburg teams usually start depends on the building:

  • Distribution centres start with inventory tracking at the dock doors and the returns lane, then add rack-level stock from the WMS.
  • Multi-client sheds begin with one table and one share link per customer, so that each sees only its own floor or layer.
  • Operators with returnable carriers — roll cages, pallets, reusable crates — look at asset tracking first.
  • RTLS and UWB is for very large halls where forklifts and people must be located continuously; most sites do not need it first.
  • If you have no readers or tags yet, our team can source RFID readers, antennas and tags on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • Where a WMS integration or a handheld app is missing, our team builds custom software as client projects, and the product runs as cloud or on-premises.

Also served nearby

The same page covers Waalwijk, Oisterwijk and Goirle, Oosterhout and Breda, Dongen and Gilze, Loon op Zand and Drunen. Nothing needs installing at any of them: the map opens in a browser. For the border region further south see Venlo and Eindhoven, and for the port side Rotterdam.

How Spatial Map does it

From a building plan to a live stock map

  1. 01

    Pick one building

    A distribution centre, a multi-client shed or a returns hall — wherever the count and the floor disagree most.

  2. 02

    Import and align the plan

    Upload the PDF, DWG or image, place it at real scale, and let AI Map draft walls, doors, racks and areas for review.

  3. 03

    Connect stock and reads

    Your WMS, scanners and RFID middleware post rows through the table write API, a polled REST endpoint or CSV and Excel uploads.

  4. 04

    Share and alert

    Read-only links for each customer, and in-app alert rules for lanes held too long and readers that went quiet.

What Tilburg teams track

Rack-level stock in a distribution centre

Locations coloured by status, with pick and packing areas in context.

Inbound and put-away gaps

Pallets received but not yet put away, shown as a lane on the dock.

Returns and re-labelling lanes

Cartons that come back, are inspected and wait for a decision, with their waiting time.

Returnable carriers

Roll cages, pallets and reusable crates tracked as tagged assets.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Inventory tracking in Tilburg — questions we get

No. It does not allocate stock or run waves. It shows on a map what your WMS, scanners and RFID readers report, so planners can see where stock sits and where the count and the floor disagree. The comparison with a WMS goes through the difference.

Yes. Each building is its own facility in one workspace, with its own floors, tables and rules, and roles decide who sees what. A read-only share link can show one customer a chosen layer or floor, with an expiry date and no account.

Yes. Read or scan one slice at a time, post the result to the table, and the map colours each location as matched, missing or unknown. The difference list goes back to your WMS through your own integration; Spatial Map does not write back to it.

No. It shows what happens inside your own building and yard from your reads and tables. Vessel and truck positions would have to come from your own system as rows in a table.

Not yet. The interface is available in English, German, French, Spanish, Arabic and Chinese, and each user picks their own language. Bin codes, location names and report titles can be in Dutch exactly as you type them. There is a Dutch version of the country page.

No. Spatial Map is sold online and our team works with customers in the Netherlands remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger estates are quoted as custom services; hardware, if you ask us to source it, is quoted per project.

Map one Tilburg shed before the next count.

Start the free trial and open the Crestline demo, or send us the plan of a distribution centre and a sample of your stock table through the contact form.