Aarhus · The container port, the rail shuttle and the cold stores

RFID tracking in Aarhus, from the container door to the pick face

Spatial Map puts RFID reads on a live 3D map of the building where they happen, so a tag read at a dock door becomes a pallet in a lane, a carton from a named container or a roll cage at a loading bay. RFID tracking in Aarhus starts at Denmark’s largest container port, where boxes are lifted off ships, emptied in the sheds behind the quay and sent on by truck or rail. Your readers and middleware do the reading; Spatial Map shows each read in place, beside stock, doors and temperatures.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo fulfilment centre: 20 racks with 2,204 rack locations, pick-to-light, packing, staging lanes, forklifts and the trailer yard.
Rack locations in the Crestline fulfilment demo
2,204
Rack locations in the Polar Pharma cold-store demo
1,140
RFID pallets moving through the Eastport demo
1,180
Free trial, up to 5 facilities, no card
7 days

A port that handles most of Denmark’s container trade

The Port of Aarhus says it has a market share of over 70 per cent of the Danish container market, and its results release for 2023 puts it at 73 per cent, up from 70 per cent in 2022 and 54 per cent in 2013. In 2023 the port handled 10,151,097 tonnes of goods, against 11,047,351 in 2022. Large container cranes work some of the world’s biggest container ships there every week. Denmark’s country page names the port in passing; here the point is the buildings behind the quay.

In those sheds the work is value-added logistics: a container is unstuffed, cartons are checked, labelled and sorted, and loads are rebuilt for the next leg. Reading tags inside a closed steel box is not something to count on, so the place for a reader is the door: an RFID portal at the unstuffing door reads each carton or pallet as it comes out, and the map shows which container’s goods are in which lane. The Eastport demo shows 50 dock doors and 1,180 RFID pallets live. Spatial Map does not connect to the port’s, the terminal’s or customs systems; it shows what your own reads say.

The rail shuttle: staging by departure

The container terminal’s own pages describe 2,400 metres of on-dock rail, including three tracks of 400 metres, and a dedicated rail service to the Taulov rail terminal near Fredericia with a transit time of three hours and four departures a week, with plans to increase capacity as demand grows. From Taulov, trains continue to the Høje-Taastrup terminal in the Copenhagen area, and the page says the electrification of the line was expected to finish in 2026. Check the operator’s page for the current timetable; it changes.

A train with four departures a week is a hard deadline: a pallet that is not in the right lane when the cut-off comes waits until the next one. Draw each lane as an area named for its departure, read pallets at the lane entry, and colour lanes by how complete the load is against the booking table. An alert rule “matches for N minutes” raises an in-app alert when a lane stays short late in the day, and the RFID gates page explains where readers go. Nothing goes out by email or SMS; alerts are shown in the app, with Show on map.

Land, warehouses and cold stores inside the port

The port has over 280 hectares of land, leased to port-related businesses with or without buildings, and it lets cold storage and warehouses with freezing, repackaging and sorting, which it says supports an uninterrupted cold chain for importing, exporting and distributing goods. A tenant in a building like that rents the shed, not the systems: the readers, sensors and stock list are the tenant’s own.

That suits a map. Upload the drawing the landlord gave you, or a photo of a plan, and align it; draw chambers, doors and bays; colour each chamber by the latest reading from your own sensors; and read pallet tags at the door so the map shows what is in which room. The Polar Pharma demo shows cold rooms, doors and 1,140 rack locations — a pharmaceutical store rather than a food one, with the same building blocks. For the sensor side see temperature monitoring. Spatial Map makes no compliance claim: your quality system remains the record.

What the terminal’s numbers mean for tag volumes

The terminal’s pages give a 1,300-metre quay, a 14-metre draft at the deepwater berth, ships up to 450 metres long and a capacity of one million TEU a year. Those are the operator’s figures for the terminal, not for any warehouse, but they set the scale: a few ships a week, each with boxes for many consignees, mean bursts of cartons through the sheds nearby.

Plan for bursts. RFID middleware posts reads in batches through the table write API (HTTPS, bearer key, bulk upsert, 60 requests per minute per key), so aggregate reads before sending, and keep one reader name per door so that the map and your data agree. The post on read rate and missed tags lists what to test on site, and the RFID rollout plan puts the steps in order. Where an inbound carton must be counted against a booking, stock counting with RFID shows the method.

Services for teams in Aarhus

Where Aarhus teams usually start depends on the building:

  • Port-side warehouses and distribution sheds start with inventory tracking at the unstuffing and loading doors, then add rack-level stock from the WMS.
  • Cold stores and food handlers start with temperature monitoring of chambers and doors, and add RFID once the rooms are on the map.
  • Depots with many returnables — roll cages, pallets, reusable crates — look at asset tracking first.
  • RTLS and UWB is for the few large halls where forklifts and people must be located continuously; most sites do not need it first.
  • If you have no readers or tags yet, our team can source RFID readers, antennas and tags on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • Handheld apps and WMS integrations are built as custom software client projects, and the product runs as cloud or on-premises.

Also served nearby

The same page covers Hinnerup and Skanderborg, Odder and Ebeltoft, Silkeborg and Randers, and the logistics area along the E45 towards Horsens and Vejle; Copenhagen is covered by the cold chain page. Nothing needs installing at any of them: the map opens in a browser, and the interface is in English, not Danish — names such as “Pakhus” or “Køleafdeling” stay exactly as you type them.

How Spatial Map does it

From the dock door to a live Aarhus map

  1. 01

    Pick one building

    A port-side shed, a cold store or a depot — wherever a pallet in the wrong lane costs most.

  2. 02

    Map doors, lanes and rooms

    Upload the plan, let AI Map draft the floor for review, and name read points the way your middleware names them.

  3. 03

    Connect reads and stock

    RFID middleware and your WMS post rows through the table write API, a polled REST endpoint or CSV and Excel uploads.

  4. 04

    Add lane and silence rules

    In-app alerts for lanes short before cut-off, chambers out of range and readers or sensors that stopped reporting.

What Aarhus teams track

Unstuffing and re-labelling

Cartons from a named container followed from the door to a lane or a rack.

Rack-level stock in distribution sheds

Locations coloured by status, with pick and packing areas in context.

Chilled and frozen stores

Chamber temperatures, doors and held pallets in place, with exportable reports.

Returnable carriers and yard equipment

Roll cages, pallets and reusable crates tracked as tagged assets.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

RFID tracking in Aarhus — questions we get

No. It has no link to port, terminal, rail-operator or customs systems. It shows what happens inside your own building from your own RFID reads, WMS and sensors, so it sits beside the port-level systems rather than replacing them.

Do not plan around it. Steel boxes block and reflect radio signals, so the dependable place for a reader is the door of the shed or the lane entry, where cartons and pallets come out one by one. Test on your own goods; the post on read rate and missed tags lists what to check.

Yes. Upload the drawing the landlord gave you, or a photo of a plan, and align it at real size. Nothing is installed in the building by Spatial Map; your readers and sensors belong to you or the vendor you pick, and the map is a browser tab.

You draw a lane per departure and keep the booking in a table; reads at the lane entry add pallets, and a style rule colours the lane by how complete the load is. The timetable itself comes from your own planning data, not from the rail operator.

No. The interface is available in English, German, French, Spanish, Arabic and Chinese, so Danish teams use it in English. Door names, rack codes and report titles are yours and can be in Danish, æ, ø and å included.

No. Spatial Map is sold online and our team works with customers in Denmark remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. RFID hardware, if you ask us to source it, is quoted per project and is not part of the subscription.

Map one Aarhus dock before the next ship.

Start the free trial and open the Eastport demo, or send us the plan of a port-side shed or cold store and a sample of your reads through the contact form.