Winnipeg · CentrePort Canada, the airport and a northern corridor

Warehouse tracking in Winnipeg, for buildings with a rail door and a truck door

Spatial Map puts stock, pallets and RFID reads on a live 3D map of each warehouse, rack by rack, so a manager can see what is where without walking the building. Warehouse tracking in Winnipeg often means a building next to CentrePort Canada, an inland port where one shed may take freight by rail, by truck and from the airport on the same day. Each building is one facility, and the map opens in a browser at the plant, at head office or at a client’s desk.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo fulfilment centre: 20 racks with 2,204 rack locations, dock doors, staging lanes, forklifts and the trailer yard.
Rack locations in the Crestline demo warehouse
2,204
Racks in the same demo
20
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

CentrePort: a tri-modal inland port beside the airport

CentrePort Canada’s own site describes 20,000 acres of industrial land, with over 2,300 acres in active development, and calls itself a trimodal inland port and Foreign Trade Zone served by three Class I railways, a 24/7 global air cargo airport and an international trucking hub. The land lies partly in northwest Winnipeg and partly in the Rural Municipality of Rosser, and the port was created under provincial legislation passed in 2008.

For a warehouse manager the interesting part is the building, not the designation. A shed here can be fed by a spur on one side and a row of truck doors on the other, with courier and freight arriving from the airport. That creates three flows through one set of racks. Spatial Map shows them side by side: dock doors coloured by status, pallets staged in the right lane, rack locations coloured from your WMS stock by bin. Trade-zone paperwork stays with your broker, and Spatial Map has no link to customs systems.

Rail doors, truck doors and the staging lane between them

A rail-served building has a different rhythm from a truck-only one. A cut of cars arrives and everything must be unloaded within a window; stock then spreads into racks, and outbound trucks load against orders. The questions are practical: which pallets came off which car, which lane they are in, and which outbound load is still short.

Read the pallets at each door type. An RFID portal at a rail door and another at a truck door give you “came in on this car” and “left on this trailer”, and the map shows the staged pallets in between. The Eastport demo shows 50 dock doors, 44 yard slots and 1,180 RFID pallets, and the Crestline demo shows 2,204 rack locations coloured from the rack inventory. The post on dock doors and trailer yard visibility explains the pattern, and RFID gates shows where to put readers.

Air cargo that never closes

The Winnipeg Airports Authority says Winnipeg James Armstrong Richardson International Airport is open 24/7/365, and reports over 4,000 cargo flights a year. Warehouses that take freight from the airport work to the aircraft’s timetable, not the shift pattern: a late cargo flight puts a pallet on a night dock.

Night-shift visibility is where a live map pays off. A history player replays what happened between 2 a.m. and 6 a.m., and a count or “not updated for N minutes” alert rule raises an in-app alert when a staged load has sat too long or a portal has stopped reporting. Alerts appear in the bell, the toast and the Alerts page; there is no email or SMS. The rollout plan for an RFID warehouse shows how to start at one door and grow.

A northern corridor, still only an idea

In October 2026 CentrePort, the operator of the Port of Churchill and the Hudson Bay Railway and a global ports group signed a non-binding agreement to explore an intermodal corridor from Winnipeg via the Hudson Bay Railway to the Port of Churchill. It is a study, not a service. Nothing about it changes what a Winnipeg warehouse needs today.

It does point at something practical, though. A new route would mean new flows through familiar buildings, and buildings with mapped doors, lanes and racks adapt faster than buildings run from memory. Starting with one shed now costs a trial, not a project; the warehouse digital twin versus WMS post explains what the map adds on top of the system you already have.

Winter on the prairie dock

A prairie winter makes door discipline a stock problem: dock doors left open let in cold, and products that must not freeze need a warm zone. Door sensors and temperature probes reporting through your gateway let Spatial Map show each door open or closed and colour each zone by its reading. A “matches for N minutes” rule turns a door left open too long into an in-app alert that clears itself when the door shuts. Warehouse temperature mapping covers the sensor side.

Services for teams in Winnipeg

Winnipeg teams usually follow this order:

Also served nearby

The same page covers Rosser and the rest of CentrePort, Headingley, East St. Paul and West St. Paul, Selkirk, and the industrial areas of the Winnipeg Capital Region. The map opens in a browser, so nothing needs to be installed at any of them.

How Spatial Map does it

From CentrePort shed to live map

  1. 01

    Pick one building

    A rail-served shed, an airport-side warehouse or a 3PL building — wherever staging errors cost most.

  2. 02

    Map racks, doors and lanes

    Import the plan or let AI Map draft the floor for a person to review; name read points the way your middleware does.

  3. 03

    Connect stock and reads

    The WMS and RFID middleware post rows through the write API, or a REST endpoint is polled; CSV and Excel uploads work too.

  4. 04

    Add door and night rules

    In-app alerts for loads staged too long, doors left open and portals that stopped reporting.

What Winnipeg teams track

Rail-served distribution

Pallets from the spur to the right outbound lane, with the dock doors by status.

Multi-client warehouses

Rack-level stock from the WMS, with a read-only share link per client.

Plants and their stores

Raw material, work in progress and finished goods tied to the line and the dock.

Frost-sensitive stock

Zones, doors and held pallets coloured by live temperature.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Winnipeg — questions we get

No. It has no link to port, customs or trade-zone systems. It shows what happens inside your own building, from your own WMS, RFID reads and sensors, so it complements those systems.

Yes. Doors are shapes on the plan, and your data colours them by status, whether the door faces a rail spur or a trailer. Read points are named after the doors, so a pallet read at either is placed in the right lane. Track and car positions outside the building are not mapped unless you draw them as areas.

It depends on the tag, the product and the reader placement, so test with your own freight. The post on RFID tags for metal, liquids and apparel lists what to check; Spatial Map shows whatever your readers report.

Yes. Your developers can push rows to a table through the write API (HTTPS, bearer API key, bulk upsert, 60 requests per minute per key), or let Spatial Map poll a REST endpoint. It does not write back to the WMS.

No. Spatial Map is sold online and our team works with customers in Canada remotely, by video call and through the contact form, in English or French. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger networks are quoted as custom services.

Map one Winnipeg shed before the next cut of cars.

Start the free trial and open the Crestline demo, or send us the plan of a rail-served or airport-side warehouse and a sample of your stock data through the contact form.