Melbourne · Port of Melbourne, the west, Dandenong South and air freight

Warehouse tracking in Melbourne, from the port to Dandenong South

Spatial Map is browser-based software that shows stock, pallets, forklifts and trailers on a live 3D map of each warehouse, using the data your WMS, RFID readers and sensors already produce. Warehouse tracking in Melbourne is a network problem: freight lands at the port, moves through intermodal terminals and rail yards, and settles in sheds in the west, the north and the south-east. Each building gets its own map, and all of them can sit in one workspace.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo fulfilment centre: 20 racks with 2,204 rack locations, pick-to-light, packing, staging lanes, forklifts and the trailer yard.
Rack locations in the Crestline demo fulfilment centre
2,204
Yard slots in the Eastport cross-dock demo
44
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

The port, and the sheds that live off it

The Port of Melbourne describes itself as “Australasia’s largest maritime hub for containerised, automotive and general cargo”. Cars, containers and general freight all leave the port gate on a truck or a rail shuttle, and a large share of it goes to a warehouse within the metropolitan area. That warehouse is where stock stops being a manifest line and becomes a physical object in a place.

Warehouse tracking at that level means three layers on one map: the rack and bin locations from your WMS, coloured by stock status; the dock doors and yard slots, coloured by turn status; and the moving things, such as forklifts, pallets and trailers, located by RFID or BLE reads. The Crestline demo shows 2,204 rack locations, pick-to-light zones and a trailer yard on one plan, and the Eastport demo adds 44 yard slots and the gate. The guide to bin inventory from CSV to a live rack map shows how little data is needed to start.

Intermodal terminals: freight that arrives by rail

Victoria’s freight plans read like a list of new addresses. The Victorian Government says it is protecting land at Truganina, in the Chartwell East precinct, for a future Western Interstate Freight Terminal; working with the Commonwealth on an interstate rail precinct at Beveridge in the north, which supports Inland Rail; extending interstate rail freight operations in the Dynon precinct beyond 2031 for up to 20 years; and encouraging private investment in terminal capacity at Somerton, Altona and South Dandenong.

For a warehouse, each of those terminals is a source of inbound loads that are planned in advance and arrive in batches. What helps is a map that shows the receiving side clearly: doors in use, pallets staged by outbound route, and a count of what has been read against what was expected. Spatial Map does not plan rail paths or read the terminals’ systems; your WMS or middleware posts the expected and received quantities, and the map colours the doors and lanes from them.

West and south-east: two kinds of shed

Melbourne’s industrial land runs in belts, and the two big ones sit at different points in the freight chain. In the west, around Truganina and Altona, the terminal sites above are being planned or built, so sheds there live close to the rail network. In the south-east, the City of Greater Dandenong describes the Dandenong South precinct as Victoria’s largest and most productive manufacturing and industrial precinct, with advanced manufacturing, food, pharmaceuticals, logistics and exports in the same area.

A manufacturer in that mix needs more than a pick list. Raw-material racks, work-in-progress carriers, finished goods and the dock are one flow, and a missing component stops a line. The Summit demo maps an assembly plant with 867 raw-material and finished-goods rack locations, and the post on manufacturing supply-chain visibility describes the pattern. A food plant adds a cold room, which is the temperature monitoring case: rooms coloured by the live reading, with the history kept row by row.

Air freight that does not stop at night

Melbourne Airport presents itself as curfew-free, and its own freight material ties overnight freight services to that status. Avalon Airport, west of the city, opened a new freight facility on 27 October 2025 that the Victorian Government says operates around the clock and is meant to reduce truck movements between Avalon and Tullamarine. Freight forwarders and handling agents near both airports work to flight times, not to office hours.

For a shed that handles air freight, tracking is time-critical in a particular way: a consignment that misses its cut-off is a late delivery, not a delay. Put the cut-off in the data. A table of consignments with a due time lets a style rule colour late-running lanes, and an alert rule raises an in-app alert when a consignment has sat in a staging lane for too long. Spatial Map does not read airline or customs systems; it shows the times your own system holds.

Services for teams in Melbourne

Melbourne teams tend to start in one of these places:

  • Multi-client sheds and freight forwarders begin with inventory tracking: rack-level stock, RFID pallets at the dock doors and one map per client building.
  • Manufacturers in the south-east start with asset tracking for tooling, returnable containers and forklifts, then link it to raw-material and finished-goods racks.
  • Indoor maps are the first step for many: a drawn building with named racks, docks and rooms, before any data is connected.
  • If you have no readers or tags yet, our team can source RFID readers, antennas and tags on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • WMS and ERP integrations, handheld apps and other custom software, such as POS or booking systems, are built as client projects. Run the product as cloud or on-premises.

Also served nearby

The same approach covers Tullamarine and Somerton, Laverton and Truganina, Derrimut and Altona, Dandenong South and Keysborough, Port Melbourne and Docklands, and Geelong and Avalon beyond the western edge. All open in a browser, with nothing to install on site.

How Spatial Map does it

From a shed plan to a live Melbourne map

  1. 01

    Pick one building

    A port-side shed, a western freight depot or a Dandenong South plant — wherever a mis-staged load costs most.

  2. 02

    Draw racks, docks and yard

    Upload the plan, let AI Map draft the floor for a person to review, then add bin locations from your WMS export.

  3. 03

    Connect stock and reads

    Your WMS and RFID middleware post rows through the table write API, a polled REST endpoint, or CSV and Excel uploads.

  4. 04

    Add cut-off and silence rules

    In-app alerts for lanes that outlive their cut-off and readers that stopped reporting; share a read-only link with each client.

What Melbourne teams track

Multi-client warehouses and 3PL sheds

Rack-level stock, picking zones and the trailer yard, with a share link per client.

Port-side cross-docks

Dock doors, yard slots and pallets staged for the right outbound route.

Manufacturing flow in the south-east

Raw materials, work in progress and finished goods from receiving to the dock.

Food and pharma cold rooms

Rooms and freezers coloured by live temperature, with held pallets marked.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Melbourne — questions we get

A WMS holds stock by bin; it does not show the building. Spatial Map reads your bin data and draws it on the plan, so a supervisor can see which lane is full, which door is blocked and where a pallet sits. It does not replace the WMS and does not write back to it.

Yes. Every building is a facility in the same workspace, and facilities can be grouped into named solutions, for example by client or by site. The Pro plan covers up to 4 facilities; larger networks are quoted as custom services.

It shows whatever your yard system or gate readers post. Your system adds a row when a trailer enters; the map moves its marker to the yard slot or door. Spatial Map does not read licence plates or telematics by itself.

Yes, through a read-only share link with a chosen floor and layers, an expiry date and a view cap. For a larger customer, a white-label client site with its own logo and roles can be set up as a service.

No. Spatial Map is sold online and our team works with customers in Australia remotely, by video call and through the contact form. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Hardware, if you ask us to source it, is quoted per project and is not part of the subscription.

Map one Melbourne shed this week.

Start the free trial and open the Crestline demo, or send us a plan and a bin export from a port-side shed or a Dandenong South plant through the contact form.