Basra · Umm Qasr, Grand Faw and the oil-sector supply bases

Warehouse tracking in Basra: port sheds, supply bases and parts stores

Spatial Map shows where each pallet, spare part and tool sits on a live 3D map of the warehouse, using the scans, RFID reads and stock lists your own systems produce, with an Arabic interface that is fully right-to-left. Warehouse tracking in Basra spans three kinds of building: transit sheds behind the ports of the south, supply bases that serve the oil sector, and the parts stores inside them. Each is its own facility, and one workspace can hold all of them.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment Center, a demo distribution site: 20 racks and 2,204 locations coloured from rack inventory, plus dock doors, staging lanes and the trailer yard.
Arabic interface with full right-to-left layout
العربية
Rack locations in the Crestline fulfilment demo
2,204
Interface languages
6
Free trial, up to 5 facilities, no card
7 days

Umm Qasr: three port zones, one sea gate

Umm Qasr lies in Basra Governorate on the Khawr az-Zubayr, part of the Khawr Abd Allah estuary that leads to the Gulf. The port opened in July 1967 and was intended as Iraq’s deep-water port. It has three zones, South Port, Mid Port and North Port, and the General Company for Ports of Iraq, under the Ministry of Transport, manages the ports. Sources give different berth counts, so none is quoted here.

Behind each zone is a ring of transit sheds, container freight stations and truck yards, and in them a familiar set of problems: which pallet belongs to which consignment, which shed is full and which truck is waiting for which door. Spatial Map maps such a site as it runs, with dock doors, trailers in yard slots, the gate and the weighbridge, and RFID-tagged pallets read through the building. The Eastport demo shows the full picture, and built-in reports for the yard, dock doors and gate export to PDF or Excel at the end of a shift. Spatial Map does not connect to port, customs or vessel systems, and it says nothing about vessel schedules, which change at short notice; it shows what is physically in your shed.

Grand Faw and the Development Road, as the official site describes them

The official site of the Grand Faw Port describes a port in Al Faw District, Basra, on the shores of the Gulf, with five new berths, a container terminal designed for 3.5 million TEU a year, a 62 km connecting road to Safwan that passes through a 2.4 km immersed tunnel, and a 23 km navigation channel. The same site describes the Development Road as a route of more than 1,200 km linking the Gulf to Europe via Türkiye. Reports differ on how far each element has progressed, so this page describes them only as the official site does.

For a warehouse operator the lesson is practical: whatever the schedule, new logistics corridors mean new sheds, and new sheds begin as drawings. A new building is the easy case for mapping, because the architect’s PDF or DWG (AutoCAD R2004–R2018, placed as a picture) can be uploaded and aligned at real scale before the first pallet arrives, and AI Map drafts walls, doors, racks and areas for a person to review. AI Map is available on paid plans and the trial, with a monthly limit.

Supply bases and parts stores for the oil sector

Basra Governorate is the base of Iraq’s southern oil fields. The state-owned Basra Oil Company is a partner in the joint venture that operates the Rumaila field, and the Zubair and West Qurna fields lie in the same province. This page uses them only as context: production figures differ between reports and are left out. What matters for a warehouse is that fields, contractors and service companies keep supply bases and parts stores of valves, pumps, seals, instruments, consumables and tools, and that the question is always the same: is the part in stock, which bin is it in, and who signed out the tool that should be on the shelf?

In Spatial Map the store becomes a rack map. The rack tool lays out bays with bin locations, and stock per bin comes from your ERP or maintenance system, by REST polling, the table write API or a CSV export, so each location shows what it holds. Tools and equipment tagged with RFID or BLE appear where your reader middleware or gateway software last reported them, and check-in and check-out are kept in the row history, up to 500 recent changes. Spatial Map does not compute positions from signal strength; your RTLS engine or gateway software reports a position or a room. The Harborview demo shows tagged assets with check-out, stores and spares, and RFID tool tracking covers the tool-crib pattern.

Heat, dust and the shed with no air conditioning

Basra’s summers are long and hot, and sheds, yards and un-cooled stores are where RFID readers, antennas and printers live. Heat and dust are reasons to choose enclosures, cable runs and mounting carefully and to test tags in your own building, a decision for your hardware vendor and integrator that Spatial Map cannot verify.

What the map can do is notice. An alert rule set to “not updated for N minutes” on the reader table raises an in-app alert when a portal goes quiet, and a temperature sensor on the same plan colours the hottest bay; see warehouse temperature mapping. For food and medicine stores the same rules apply to cold rooms; see temperature monitoring. Alerts are in-app only; there is no email or SMS.

Services for teams in Basra

Basra teams usually begin with parts and pallets:

  • Port-side operators and forwarders start with inventory tracking at dock doors, with a CSV or Excel list of consignments as the first table.
  • Supply bases and contractors start with asset tracking for tools and equipment, then link it to bin-level stock of parts.
  • For large yards and bases where vehicles and people must be located continuously, see RTLS and UWB; a BlueIOT server connects directly and other engines through the write API.
  • If you want readers, tags or gateways to test with, our team can source them on request, quoted per project, with manufacturer warranty: see hardware and demo kits on request.
  • Where there is no in-house developer, our team builds ERP and maintenance-system integrations as client projects, in Arabic or English. The product runs as cloud or on-premises.

Also served nearby

The same approach covers Az-Zubayr, Abu Al-Khasib and Al-Faw, and the sheds and yards along the roads between Basra city and the Gulf. Nothing needs to be installed at any of them: the map opens in a browser.

How Spatial Map does it

From a parts list to a live store map

  1. 01

    Upload your list

    A CSV or Excel export of bins, parts and quantities becomes a table in minutes.

  2. 02

    Draw the shed or store

    Import the plan or a photo, align it, and let AI Map draft walls, doors and racks for a person to review.

  3. 03

    Tag tools and pallets

    RFID or BLE reads from your middleware or gateways arrive through the write API or REST polling.

  4. 04

    Find, trace and report

    Live map, row history for every part and tool, and reports exported to PDF or Excel.

Where Basra teams start

Port-side transit sheds

Dock doors, yard slots, gate and weighbridge with pallets in the right lane.

Spare-parts stores

Bin-level stock of valves, pumps and consumables from your ERP or a CSV export.

Tools and field equipment

Tagged tools with check-out, return and last-seen location.

Food and medicine cold stores

Cold rooms and held pallets by live temperature, with history.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Basra — questions we get

No. It has no link to port, customs or terminal systems and does not show vessel schedules. It shows what is inside your own building, from your own scans, RFID reads and ERP or maintenance system.

Yes, with a full right-to-left layout. The app is available in Arabic, English, Chinese, French, German and Spanish, and each user picks their own.

Yes. Upload a CSV or Excel export of parts and bins and the rack map shows stock per location. RFID readers or BLE gateways can be added later, through your middleware or gateway software.

The ones you choose. Spatial Map is hardware-agnostic: your RFID middleware, RTLS engine or IoT platform posts rows to a table through the write API (HTTPS, bearer API key, bulk upsert, 60 requests per minute per key), or exposes a REST endpoint that Spatial Map polls.

Yes. The MIT-licensed open-source edition can be self-hosted with Docker Compose, and a hybrid setup puts a small on-site agent beside your devices. In the cloud, access is limited to named members with roles. We make no certification claim; check your own requirements.

No. Spatial Map is sold online and our team works with customers in Iraq remotely, by video call and through the contact form, in Arabic or English. There are no local resellers or partners.

In US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities. Larger estates are quoted as custom services.

Find every part, pallet and tool on one map.

Start the free trial in Arabic or English, or send us a shed or store plan and a parts export, and we will show it back to you live.