Dakar · Port moles, Diass zone, Ndayane and the airport

Warehouse tracking in Dakar, from the port moles to Diass

Spatial Map shows every pallet, rack and door of a warehouse on a live 3D map of the building, using the reads and rows your RFID, barcode and WMS systems already produce. Warehouse tracking in Dakar has a particular geography: a port on a narrow peninsula, a new deep-water port being built about 50 kilometres away, and a special economic zone and an airport at Diass in between, so one company often runs stock in several places at once, and each is its own facility on the same account.

No credit card. Runs in the browser. Pro is $60/month for up to 4 facilities. Book a demo

Crestline Fulfillment Center, a fulfillment center demo, in the Spatial Map 3D viewer with live device markers
Crestline Fulfillment Center
Crestline Fulfillment, a demo distribution centre: 2,204 rack locations coloured by stock status, with staging lanes in front of the docks.
Rack locations in the Crestline fulfillment demo
2,204
Dock doors in the Eastport cross-dock demo
50
How often alert rules are checked, with alerts shown in the app
15 s
Free trial, up to 5 facilities, no card
7 days

Moles, draughts and a container terminal on 24 hectares

The Port of Dakar’s own description divides it into a southern zone of three moles, joined by quays along the basins, and a northern zone of four moles (4, 5, 8 and 9), a north jetty and the container terminal. Permitted draughts run from about 8.5 to 10 metres in the south, and the northern wharf offers 12 metres. The container terminal is listed at about 24 hectares with some 700 metres of quay; an older document gives 18 hectares, so treat the figure as approximate. A 2026 report puts the port’s draught at about 13 metres against more than 18 at Ndayane.

A port that size on a peninsula cannot store much. Boxes are collected quickly and unpacked in warehouses beyond the gate, so the busy building is the warehouse, not the quay. Inside it the questions are the same everywhere: which pallet is in which lane, which door is occupied, which order is short. RFID portals at the doors and handheld counts at the racks answer them, and the Crestline demo shows what that looks like at 2,204 rack locations. Spatial Map does not connect to the port or terminal systems.

Ndayane: a second port, and two sets of warehouses

The deep-water port at Ndayane is located about 50 kilometres from Dakar. Its operator reports that a 5-kilometre access channel has been dredged to 20 metres, that an 875-metre berth pocket and a 600-metre turning basin are part of the design, that dredging finished 13 months early (announced 27 July 2026), and that completion is planned for 2028. Whatever the date turns out to be, the effect on warehouses is the same: for some years companies will receive from Dakar and from Ndayane at once, with stock split between sites.

Each building should be its own facility with its own plan, and facilities can be grouped into a solution, so a manager opens one account and sees the port-side warehouse, the zone warehouse and the airport store together. Start with the building you already have: Spatial Map takes its plan, a photograph or a sketch, and your stock list as a CSV, and later adds readers. The post on WMS integration shows how rows reach the map.

Diass: a new zone and an airport

The Dakar Integrated Special Economic Zone at Diass is run by APIX, the investment promotion agency, and covers 718 hectares with a 45-hectare pilot phase and about 12,000 hectares in reserve; its planned site includes an industrial park, offices and a logistics platform. A 66-hectare plot there was allotted on 5 August 2025 for a prefabrication plant, and the zone is described as near Blaise Diagne International Airport and the future port of Ndayane. The airport itself opened to passengers in December 2017, more than 40 kilometres east of the city, replacing the old one in Dakar.

A new building has a floor plan before it has a single pallet, which makes it the easiest kind to map: import the CAD file or PDF, draw the racks and dock doors, and the map is ready on the day stock arrives. For cargo areas at an airport, the Silverbay Airport demo shows how zones inside a large building are coloured by live data. Spatial Map is independent of the airport authority and reads only what your own team sends.

Transit stores: one yard, many statuses

Dakar is a gateway for landlocked Mali, so some warehouses hold goods that are in transit rather than for sale. Published figures for Mali’s share of the port’s traffic differ between sources, so none is quoted here. What matters inside a building is that two pallets that look identical may have different statuses, such as waiting for clearance, cleared, loaded or held, and those statuses come from your own system.

Load that status as a column on a table and let a style rule colour each lane or pallet, so a dispatcher sees the waiting units at a glance, and an in-app alert fires when a unit has been “waiting” for more than a set number of hours. Spatial Map holds no customs or transit declarations. See inventory tracking for the stock side.

Services for teams in Dakar

Where Dakar teams usually start depends on the building:

  • Port-side and transit warehouses usually begin with inventory tracking at doors and lanes, because a mis-staged pallet costs a truck’s turn.
  • Companies taking space in Diass or Diamniadio tend to start with the indoor map from the architect’s drawings, before any tags are bought.
  • Asset tracking follows for returnable pallets, forklifts and reefer units; RTLS and UWB matters only in very large yards.
  • If you have no readers or tags yet, our team can source RFID readers, antennas and tags on request, quoted per project, with warranty and device support from the manufacturer: see hardware and demo kits on request.
  • Integrations with your ERP or WMS and Android handheld apps are built as client projects, for example an RFID inventory system; the product runs as cloud or on-premises.

Also served nearby

The same approach covers Rufisque, Bargny, Mbao, Pikine and Diamniadio around the city, and Thiès and Mbour inland and along the coast. Nothing needs to be installed at any of them: the map opens in a browser.

How Spatial Map does it

From the port moles to the rack

  1. 01

    Pick one warehouse

    The building where a mis-staged pallet costs most, in Dakar or at Diass.

  2. 02

    Map lanes, doors and racks

    Upload the plan, photo or sketch, let AI Map draft the floor, and name read points the way your system names bins.

  3. 03

    Load stock and status

    A CSV or Excel list of bins and stock, then RFID middleware or your WMS posting rows through the write API or a polled REST endpoint.

  4. 04

    Add waiting and silence rules

    In-app alerts for units waiting too long and readers that stopped reporting.

What Dakar teams track

Port-side and transit warehouses

Lanes, dock doors and pallets with their clearance status.

Distribution centres

Rack-level stock by bin, with staging lanes at the docks.

Airport and perishable cargo

Cold rooms by live temperature, held pallets marked.

Returnable assets

Pallets, cages and equipment with last-seen areas.

See it on real demo facilities

Fictional names, real floor plans, live sensors, RFID, BLE tags and gateways — open any of them in the browser.

All 13 demo facilities

Warehouse tracking in Dakar: questions we get

No. It has no link to port, terminal, customs or transit systems. It shows what happens inside your own building, from your own reads, WMS or ERP and sensors, so it complements the port-level systems rather than replacing them.

Give each building its own facility and plan, then group them into one solution. A manager opens the account and moves between them, and a table can carry a site column so reports cover both.

Yes. Import the DWG (AutoCAD R2004–R2018, placed as a picture) or PDF, align it and draw the racks and doors, or let AI Map draft them for review. When stock arrives you load a CSV or connect your WMS.

If your own system has a status per pallet or container, load it as a column and add a style rule to colour by it. Spatial Map holds no customs declarations itself, so the status is only as current as the data you send.

Yes. The app is available in French, English, Arabic, Spanish, German and Chinese, and each user picks their own. There is no Wolof interface.

No. Spatial Map is sold online and our team works with customers in Senegal remotely, by video call and through the contact form. There are no local resellers or partners. Pricing is in US dollars, the same worldwide: a 7-day free trial for up to 5 facilities with no card, then Pro at $60 a month or $600 a year for up to 4 facilities.

Map one Dakar warehouse before the next shipment.

Start the free trial and open the Crestline demo, or send us the plan of a port-side store or a new building at Diass and a sample of your stock list through the contact form.