Hardware · BLE

BLE beacons and gateways: choosing, placing and connecting them

Spatial Map shows BLE tracking on a live 3D floor plan, and on request our team sources the BLE beacons and gateways behind it. BLE beacons and gateways give room- or zone-level presence at low cost per tag; we help you choose beacon types and gateway density for your building, quote the hardware per project, and connect it so the rooms light up on the map.

Spatial Map: no credit card for the trial, runs in the browser, Pro is $60/month for up to 4 facilities. Explore the live demo

Illustrations of device types — not vendor product photos.

How BLE tracking hardware fits together

A BLE system has two kinds of device. Beacons or tags are small battery-powered transmitters attached to an asset, a person’s badge or a fixed spot. Gateways are powered receivers on the wall or ceiling that hear the tags nearby and forward what they hear — tag ID, signal strength, battery, time — over the network. The tags are cheap and numerous; the gateways are where planning and cost go.

In Spatial Map the result is presence: the gateway that hears a tag tells you the room or zone it is in. That is usually exactly what an operations team needs — which room, how long, was it in the right place — without a survey of every square metre.

Beacon and tag form factors

The right form factor depends on what the tag is attached to and how long it must last without a visit:

  • Asset tags — hard, rugged cases with an adhesive or screw mount for equipment, carts, tools and containers.
  • Badge-style tags — a lanyard or clip format for staff or visitors, where the use case and privacy rules allow it.
  • Beacons — small coin- or puck-style transmitters, often used as fixed reference points in a room or on a shelf.
  • Specialist cases — sealed or higher-protection housings for wet, cold or outdoor use, and tags with sensors (for example temperature) where the project needs them.

Battery life: what to ask

Battery life is a trade-off, not a number to copy from a data sheet. Faster transmit rates give fresher locations and use more battery; slower rates last longer but react later. Tag temperature, transmit power, motion-triggered modes and battery size all change the result. Before ordering volume, decide how often you need an update — a tool crib may need minutes, a cart on the move may need seconds — and ask the manufacturer what rate the quoted battery life assumes. We do not quote battery figures here: they come from the manufacturer.

Plan for replacement too. Who changes a battery, how do you know a tag is running low, and is it cheaper to replace the whole tag? Spatial Map can show battery and last-seen from the data your gateways forward, so a quiet tag stands out.

Gateway density, zone-level or x/y

Gateway density sets how precisely you can place a tag. One gateway per room gives room-level presence. More gateways with overlapping coverage in a large open space give finer zones. Walls, shelving, people and metal all affect what a gateway hears, so we place gateways from your floor plan and adjust after a short test, rather than from a rule of thumb. Backhaul matters too: gateways need power and a network path (Ethernet, PoE or Wi-Fi, depending on the model).

Be clear about the limit: zone-level presence is what Spatial Map shows from BLE gateways. Spatial Map does not compute x/y positions from signal strength. If you need coordinates, a positioning engine does the calculation and Spatial Map shows its result — or UWB may be the better technology; see UWB anchors and tags and BLE vs UWB vs Wi-Fi RTLS. How accurate beacons really are is in how accurate are BLE beacons.

Sourcing and connecting

We source beacons, tags and gateways from established vendors through normal commercial channels, quoted per project; availability and exact options are confirmed in the quote. The gateway side is integrated with a connector — your middleware, or a small service we build — that posts rows to a Spatial Map table through the table write API. The chain is explained in BLE gateway for asset tracking, and the software side is on BLE asset tracking and Bluetooth beacon tracking.

BLE device types

Device types, not a parts list. Illustrations, not vendor product photos.

  • BLE gateways

    Powered receivers that hear tags and forward the messages; placed from your floor plan to cover the rooms or zones you care about.

  • Beacons and asset tags

    Battery-powered tags in rugged, badge or beacon formats; the tag ID is the key joined to your asset register.

How it connects

From tag to room on the map

  1. 01

    Tag

    A beacon or asset tag transmits at the rate you chose.

  2. 02

    Gateway

    The gateway that hears it forwards tag ID, signal strength, battery and time.

  3. 03

    Connector

    Middleware or a small service maps each gateway to a room or zone and filters repeats.

  4. 04

    Spatial Map table

    Rows are posted with the table write API: HTTPS, one bearer key, bulk upsert, 60 requests a minute per key.

  5. 05

    Data link and map

    Tags show in their room or zone, with last seen, battery and the History player.

What a BLE hardware project delivers

Gateway placement plan

Gateway positions and coverage zones drawn on your floor plan, adjusted after a short test.

Beacons, tags and gateways

Sourced against a per-project quote; warranty from the manufacturer.

The connector

Gateway-to-zone mapping and duplicate filtering, posting to Spatial Map.

Live map and alerts

Tags by room, reports, and in-app alerts such as a tag not seen for N minutes.

BLE beacons and gateways — frequently asked questions

Yes, on request and per project. We help choose tag types and gateway density, source the devices and connect them to Spatial Map. There is no online shop.

No. There is no online shop and no price list. Hardware is quoted per project, because the right quantities, antennas, tag types, cabling and shipping depend on your building and your use case. Send us a floor plan and a short description and we reply with a quote.

No. Spatial Map is not an authorised partner, distributor or certified integrator of any hardware vendor, and it is not affiliated with or endorsed by them. We source devices through normal commercial channels for your project. Warranty and device support come from the manufacturer, as they would if you bought the devices yourself.

It depends on the floor plan, the materials and how fine the zones must be. One per room gives room-level presence; open spaces need more with overlapping coverage. We place them from your plan and adjust after a test.

No. It shows the room or zone the gateways report. It does not compute positions from signal strength. A positioning engine can do that and Spatial Map shows its output, or UWB may suit better. See BLE vs UWB vs Wi-Fi RTLS.

It depends on transmit rate, power, temperature and battery size. The manufacturer’s figure assumes a specific rate, so ask what rate it is based on; we do not quote battery life on this page.

Yes. Spatial Map is hardware-agnostic and we integrate devices you already own. See hardware integration.

Plan your gateways on your own floor plan.

Send a floor plan and the assets you want to see by room. We will propose gateway positions, tag types and a quote.